I currently have a Synology 220+ and a couple of VPS’s, and I’m looking to consolidate, while getting out of Synology’s walled garden. I’ve already got a couple of 3.5’s in the Synology, and 4 2.5’s lying around and I’m planning on running a number of docker containers and a couple of vms.
That said, I’ve never built anything before, and basically just went to PCPartPicker, started with the case, and checked 5-stars on each component and went from there. So… how absurd is my build?
| Type | Item | Price |
|---|---|---|
| CPU | AMD Ryzen 5 5600X 3.7 GHz 6-Core Processor | $135.00 @ Amazon |
| CPU Cooler | Cooler Master MasterLiquid 360L Core ARGB Liquid CPU Cooler | $90.71 @ Amazon |
| Motherboard | MSI MAG B550 TOMAHAWK ATX AM4 Motherboard | $165.99 @ B&H |
| Memory | TEAMGROUP T-Force Vulcan Z 16 GB (2 x 8 GB) DDR4-3200 CL16 Memory | $26.99 @ Amazon |
| Storage | Seagate IronWolf NAS 8 TB 3.5" 7200 RPM Internal Hard Drive | Purchased For $179.00 |
| Storage | Seagate IronWolf NAS 8 TB 3.5" 7200 RPM Internal Hard Drive | Purchased For $179.00 |
| Storage | Seagate IronWolf NAS 8 TB 3.5" 7200 RPM Internal Hard Drive | $159.99 @ Adorama |
| Case | Fractal Design Meshify 2 ATX Mid Tower Case | $173.89 @ Newegg |
| Power Supply | Corsair RM650 (2023) 650 W 80+ Gold Certified Fully Modular ATX Power Supply | $89.99 @ Corsair |
| Prices include shipping, taxes, rebates, and discounts | ||
| Total | $1200.56 | |
| Generated by PCPartPicker 2025-05-23 19:32 EDT-0400 |
Thanks! Wasn’t sure about the cooling, so that’s good to know. And yeah, I didn’t know if I actually wanted graphics or not. Whether integrated or a card. Actually, now that I’m typing this out, I do need something for Jellyfin transcoding at least.
There is a part of me that wanted to run my own small llm to go with home assistant, but I don’t think that’s really necessary.
You can use the stock cooler it comes with. That’s said to be a bit loud so any cheap tower cooler will do. But the 5600 is way overpowered for a home server. And you’d need one with a built in GPU, like the 5600G. While having more power than needed is not a bad thing, this baby will suck quite a bit of electricity so it’s more expensive to run. Unless you really need the power, I’d look at an Intel N150 or N200.
If you’re considering video transcoding, I’d give Intel a look. Quicksync is pretty well supported across all of the media platforms. I do think Jellyfin is on a much more modern ffmpeg than Plex, and it actually supports AMD. But, I don’t have any experience with that… Only Nvidia and Intel. You really don’t need a powerful CPU either. I’ve got my Plex server on a little i5 NUC, and it can do 4k transcodes no problem.
You most likely want graphics for initial install and troubleshooting (like when your NAS loses connection for example). I would recommend a 5600G instead. Nice little APU that works great with Jellyfin transcoding. It’s what I have in my own DIY NAS.
Everyone else seems to be recommending going with Intel because it’s apparently the gold standard in transcoding. But you don’t have any problems with yours and being an amd?
The thing is that even quite old Intel CPUs have good transcoding support with Jellyfin. For people buying used desktops is great. AMDs are a more recent development. Since you’re building everything brand new, take your pick. With AMD you could run some light ROCm workloads.