I am just wondering if it would be better to go straight to fiber instead of ethernet as most have fiber to the home anyway. That should help with future speed upgrades beyond 10Gbit as well.
I don’t think “most” have fiber to the home, first of all. Cable companies in the US do multigig speeds via fiber to a relay and coax cable to the home. Fiber is great when it’s underground or in a data center and safe, but it is delicate and easy to break the cables so not a great home solution. Fiber terminations are difficult and more expensive. The power efficiency payoff on a 1m cable from your router to your pc is probably going to be measured decades, more if you factor in the higher cost of the cable.
I frequently transfer data over the LAN at a higher rate than my internet connection.
Kinda wish it was easier to test the connection speed between devices tbh, unless someone knows a good way of doing it but many devices are so locked down I am not sure how you would.
Add to that, that most homes have multiple devices that you want connected. So you need a fiber switch as well. 150usd will get you a mikrotik crs305, with 4 sfp+ ports. And you’ll probably want a router, but perhaps you can offload that to your ISP, kinda like routing on a stick.
I am just wondering if it would be better to go straight to fiber instead of ethernet as most have fiber to the home anyway. That should help with future speed upgrades beyond 10Gbit as well.
Fiber is also more power efficient? Why not?
I don’t think “most” have fiber to the home, first of all. Cable companies in the US do multigig speeds via fiber to a relay and coax cable to the home. Fiber is great when it’s underground or in a data center and safe, but it is delicate and easy to break the cables so not a great home solution. Fiber terminations are difficult and more expensive. The power efficiency payoff on a 1m cable from your router to your pc is probably going to be measured decades, more if you factor in the higher cost of the cable.
You need more than10Gb/s at home? I mean we all know the 640Kb meme but I’m curious here :-)
I frequently transfer data over the LAN at a higher rate than my internet connection.
Kinda wish it was easier to test the connection speed between devices tbh, unless someone knows a good way of doing it but many devices are so locked down I am not sure how you would.
An SFP+ single mode module alone costs ~20€ at least. Add to that a PCIe extension card and you’re way over the cost of copper.
Add to that, that most homes have multiple devices that you want connected. So you need a fiber switch as well. 150usd will get you a mikrotik crs305, with 4 sfp+ ports. And you’ll probably want a router, but perhaps you can offload that to your ISP, kinda like routing on a stick.